Arctic Liquid Freezer III 280mm Liquid CPU Cooler – 2 x 140mm Fans & PWM Controlled Pump
£81.08
Arctic Liquid Freezer III 280mm Liquid CPU Cooler – 2 x 140mm Fans & PWM Controlled Pump
Experience Unparalleled Cooling Efficiency with the Arctic Liquid Freezer 280mm CPU Cooler! The Arctic Liquid Freezer 280mm CPU Cooler is ready for immediate use thanks to its pre-installed radiator fans in push configuration. The fan cables are integrated into the jacket of the hoses so that only one cable needs to be connected to the motherboard. With the MX-6 thermal compound included in delivery, you have everything you need for quick and easy installation. Future-Proof Compatibility The Arctic Liquid Freezer 280mm CPU Cooler works with both Intel and AMD parts in your computer. When Intel brings out their new Arrow Lake chips, they will fit just fine. If you have a Liquid Freezer III, you don’t need to buy a new cooler; it will work with the new chips without any problems. Silent and Powerful VRM Fan Enjoy quiet cooling with the new VRM fan. It’s 60 mm big and has special controls to keep your computer cool, especially when it doesn’t have much air or when you’re making it run faster. This helps the parts that control power last longer. Contact Frame for Intel LGA1700 and LGA1851 The special frame from ARCTIC makes sure your computer’s brain and the main board don’t get squished. It helps keep your computer cool all the time, stops big problems from happening later, and makes it easy to put together. Optimized, In-House Developed Water Pump The Liquid Freezer III has a special water pump made by the company. It uses smart controls to work well and stay quiet. The improved parts help keep your computer cool and don’t make a lot of noise. Complete Control or Simple Control You can pick different settings for each part of the Liquid Freezer III to control them just right or connect everything for an easy start and care. It changes to fit what you like and what your computer needs. Native AMD Offset Mounting For several generations, AMD has been using a multi-die chipset design for its Ryzen desktop processors. Unlike Intel CPUs, the hotspot on these processors is not located centrally under the IHS (Integrated Heat Spreader), but is slightly offset. The AMD mounting solution therefore has a 5 mm offset to achieve optimum heat dissipation. Improved Radiator Design The cooling surface of the 38 mm thick radiator has been extended by 23 % by increasing the fin stack. This not only enables improved heat dissipation but also a larger liquid volume. Consequently, the heat build-up in the water cooling system is slowed down and power and temperature peaks can be effectively managed over a longer period. High Static Pressure ARCTIC relies on the well-proven P fans, who have already received several awards for their outstanding performance. The P series is particularly suitable for use on heat sinks and radiators with a high fin density. Thanks to their high static pressure, they achieve significantly better results compared to fans designed for Specification: Type: CPU Liquid Cooler AMD/Intel: Combo Radiator Size: 280 mm Compatibility: Intel: 1700 AMD: AM5, AM4 Fan Connector(s): 4-pin Fan Controller: PWM Fan Bearing: Fluid Dynamic Bearing Rotation Speed: Radiator Fans: 200 – 1700 RPM Pump: 800 – 2800 RPM (PWM controlled) VRM Fan: 400 – 2500 RPM (PWM controlled) Colour: Black LED Lighting: – Material: Cold Plate: Copper, Micro Skived Fins Radiator: Aluminium Dimensions: Radiator: 317 (L) x 138 (W) x 38 (H) mm Tube Length: 450 mm Tube Diameter Outer: 12.4 mm Tube Diameter Inner: 6.0 mm Fan Dimensions: 2 x 140mm P14 PWM PST Fans Air Flow: 72.80 cfm Weight: 1705 g Power: Pump Current/Voltage: 0.35A / 12 V DC VRM Fan Current/Voltage: 0.05A / 12 V DC Radiator Fan Current/Voltage: 0.12A / Warranty: 6 Years
